Q Power 15 subwoofer specifies Howard

In-Wall and In-Ceiling Subwoofers

  • Finish solutions to match Visual Performance, Architectural Series, and TRUFIG style installations
  • Pair with Sonance DSP amplifiers for custom-tuned performance
  • Designed for in-wall and in-ceiling applications, adding low end balance and removing visual intrusion

 

Internal crossover frequency

BPS8

Woofer

8 "(203mm) dual voice coil, carbon fiber / Rohacell laminated cone with a rubber surround

Frequency Response

30Hz - 90Hz - ± 3dB

Impedance

6 ohms nominal; 4 ohms minimum

Power handling

150 watts maximum

Sensitivity

90dB SPL (2.83V / 1 meter)

Internal crossover frequency

90Hz @ 12dB per Octave

Cutout Dimensions

Dimensions

24 "x 12 5/16" x 9 1/4 "(610mm x 313mm x 235mm)

Shipping Weight

45 lbs (20.41 kg) each

Requirements

* VPBPC4R or VPBPC6R (Bandpass Connectors with Grilles); sold separately

Cricket

6 7/8 "or 9 3/4" (175mm or 248mm) diameter round, paintable perforated steel

VPSUB

Woofer

10 "(254mm) laminated carbon fiber cone with a rubber surround

Frequency Response

34Hz - 250Hz ± 3dB

Sensitivity

90dB SPL (2.83v / 1 meter)

Internal crossover frequency

Cutout Dimensions

12 3/4 "x 12 3/4" (324mm x 324mm)

Dimensions

15 "x 15" x 3 7/8 "(381mm x 381mm x 98mm)

Shipping Weight

13 lbs (6kg)

Requirements

* Sonance DSP 2-150 or DSP Sonance DSP 8-130 MKII (using two channels bridged)

Cricket

15 "(381mm) square, paintable perforated steel