What is geodetic in Catia

  The profits of the future will come from intelligent, autonomous electric vehicles. (3DEXPERIENCE)D4NI3L
member


    

Posts: 1
Registered: January 20, 2009

created on: Jan. 20, 2009 14:39   <-- editieren="" zitieren="" --="">   Submit unities:

Hello board,

I just need to transfer a few points on one corner to another. Both curves have several radii, so the calculation using the radian dimension is not easily possible.

There is a "reference point" on both curves. All other points on this curve should be dimensioned from this point. The route remains the same on both curves.

To do this, I now have to measure the distance of the point to be moved on the "output curve" starting from the reference point. As a route on the curve.

Is there a function for this?

(The points on the first curve already exist).

Write a reply to this post (with Quote/Quote of the contribution)

denyo_1
Moderator



    

Posts: 2506
Registered: 08/10/2005

HP Compaq 8710w, Intel Core Duo T7700, 2.40 Ghz, 3GB RAM, Windows XP Professional @ 32bit, Quadro FX 1600M, CATIA V5 R19 SP3

created on: Jan. 20, 2009 3:08 pm   <-- editieren="" zitieren="" --="">   Submit unities:Only for D4NI3L

Hi Daniel,

and welcome to the forum. Please fill in your system information, it is decisive which release the questioner is using.

So IMHO there is no separate function for this in CATIA. But you can create levels on the line (normal and by point) at the individual points and then "break up" the line with a split command at the individual points, then measure and transfer the length of the individual curves with the "caliper". Ev. I could also imagine a macro that then writes the results in Excel.

------------------
MFG Daniel

KATJA is just a bitchy French woman

Write a reply to this post (with Quote/Quote of the contribution)

bgrittmann
Moderator
constructor


    

Posts: 11074
Registered on: 11/30/2006

CATIA V5R19

created on: Jan. 20, 2009 3:09 pm   <-- editieren="" zitieren="" --="">   Submit unities:Only for D4NI3LMörchen
Honorary member V.I.P. h.c.
CAD trainer (CATIA V5)



    

Posts: 3830
Registered: 03/14/2007

Release 19 SP2

created on: Jan. 20, 2009 5:31 pm   <-- editieren="" zitieren="" --="">   Submit unities:Only for D4NI3L

Hello D4NI3L,

if you create the points with "point on curve", you can do this simply with a formula:
The distance can be specified there geodetically (curve length). This gives you a parameter.
Now you can generate the geodetic length at the 2nd point using the formula:

Point2 \ length = point1 \ length

Greeting
Mörchen

Write a reply to this post (with Quote/Quote of the contribution)

rokoe01
member
engineer


    

Posts: 17
Registered on: 01/20/2009

3GB RAM
V5 R17
32-bit XP

created on: Jan. 21, 2009 10:39 am   <-- editieren="" zitieren="" --="">   Submit unities:Only for D4NI3L

Hello everybody

This is my first post and already a question :-)

I have a similar problem, I would like to measure the neutral chamfer on a gasket so that it can be ordered correctly. Is there a way to measure the length of the curve in one go? The contour consists of a sketch that was then created with a rib.

Write a reply to this post (with Quote/Quote of the contribution)

runner
member
Dipl.-Ing. (masch)


    

Posts: 146
Registered: 11/28/2003

Catia V5 R14 SP4 Thinkpad T40

created on: Jan. 21, 2009 14:35   <-- editieren="" zitieren="" --="">   Submit unities:Only for D4NI3L